Recycled HDPE Granule
June 6, 2018
June 6, 2018
Show all


hdpe resin ,hdpe granules,virgin HDPE Resin for PE100/PE80 Grade
1. Packaging & Delivery
Packaging Detail: 25kg/bag, kraft paper bags with plastic bags inside
Delivery Detail: 20 day after the deposite
2. Specifications
Flame resistance material for HDPE pipes
This is the raw material for producing pipe
Grade: PE100/PE 80
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 ° C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
3. Application:
Make barrela, plastic bottle and bag, make all kind of pipes, make shading net, and make cable wire-insulating
4. Storage:
Shelf life: It should avoid damp, contaminated and direct sun light during transport. And should be stored in ventilated and dry place. Do not put it with flammable and corrosive substances together, and away from the fire.



HDPE cable material Property Typical Value
Mass density g/cm 3 0.941-0.959
Melt flow Rate(190 centidegree /2.16kg)g/10min ≤1.0
Tensile yield strength MPa ≥19.0
Flexural modulus Mpa ≥965
Elongation@ break % ≥400
Impact Embrittlement temperature centidegree MAX -118
Dielectric Constant
100KHZ 2.32
100KHZ 2.32
Loss Tangent
100KHZ MAX 0.0001
1MHZ MAX 0.0001
Volume resistivity OHM-CM MIN 1×10 15


There are no reviews yet.

Be the first to review “HDPE-Granule-PE100PE80”

Your email address will not be published. Required fields are marked *